I think of false beats as occurring due to variations in the speaking length of the string that are due to poor or inconsistent termination at either end. As the string vibrates it occilates back and forth between various termination points. That variation creates a series of mismatched frequencies which we perceive as false beats. David Love Original Message ----- From: "Richard Brekne" <Richard.Brekne@grieg.uib.no> To: <pianotech@ptg.org> Sent: September 27, 2001 12:11 AM Subject: Re: String Question > > > Delwin D Fandrich wrote: > > > -> > > > When two strings of different size are in the same unison, it cause false > > beats. > > > > What you're hearing is not actually a false beat, but a real beat in the > > harmonics which become enharmonic because of the difference in inharmonicity > > between two wires of different diameters. > > > > --ddf > > Hmm.. this brings up the question then of just what is a false beat. A single > string with two coincident segments that have different frequencies at the same > tension would seem to be a "real beat" by the definition above. And perhaps it > is more correct to refer to that situation as such... but then what of false > beats are left to be actually false..? > > -- > Richard Brekne > RPT, N.P.T.F. > Bergen, Norway > mailto:rbrekne@broadpark.no > >
This PTG archive page provided courtesy of Moy Piano Service, LLC