Hi, John, Contact Kathy Voss, RPT, in Racine, WI. piano@wi.net. She re-springs rails for the trade, quality is good, price is reasonable. Mike ----- Original Message ----- From: John O'Dell <john.odell@verizon.net> To: <pianotech@ptg.org> Sent: Tuesday, April 02, 2002 4:07 PM Subject: Re: hammer spring rail replacement > The rail just needs to be rebuilt or replaced. My thinking was that if a > shop were set up with the appropriate tooling and fixtures, it would be much > easier to build it than to rebuild it! Many of us do our own keytops and > others choose to send them to a specialist. I was hoping to find a shop > specializing in drop-in replacement rails to the trade. If anyone knows of > a resource, please post it! > thanks! > ----- Original Message ----- > From: "Farrell" <mfarrel2@tampabay.rr.com> > To: <pianotech@ptg.org> > Sent: Monday, April 01, 2002 10:50 PM > Subject: Re: hammer spring rail replacement > > > > Did the rail break? Is that why you want to replace it? Or does it just > need to be rebuilt? > > > > Terry Farrell > > > > ----- Original Message ----- > > From: "John O'Dell" <john.odell@verizon.net> > > To: <pianotech@ptg.org> > > Sent: Monday, April 01, 2002 5:18 PM > > Subject: hammer spring rail replacement > > > > > > Can anyone tell me where I can get a replacement hammer spring rail for > kimball model 3795? > > Thanks! > > > > John O'Dell RPT > > > > > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC