So whats wrong here ?

[Joe And Penny Goss]

Richard Brekne,
action screws not tightened correctly?
Joe Goss
imatunr@srvinet.com
www.mothergoosetools.com
----- Original Message ----- 
From: "Richard Brekne" <Richard.Brekne@grieg.uib.no>
To: "PTG" <pianotech@ptg.org>
Sent: Wednesday, April 10, 2002 9:56 AM
Subject: So whats wrong here ?


> Suspect....
> 
> a Petrof 235 grand...serial 430019.
> 
> --Hammers and shanks have been changed at some point,
> --regulates at present with drop screws way up... have had to grind
> several in order to keep from breaking them on the underside of the pin
> block.
> --Letoff button has plenty of room to go up, but its on the high side.
> --a 90 degree rake and shank parallel to strings would necessitate
> shortning the borelength... hmmmm.
> --present rake is 90 degrees, borelengths of 56 / 63
> 
> So.... grin... Name That Problem !! :)
> 
> --
> Richard Brekne
> RPT, N.P.T.F.
> Bergen, Norway
> mailto:rbrekne@broadpark.no
> http://home.broadpark.no/~rbrekne/ricmain.html
> 
>