---------------------- multipart/alternative attachment In a message dated 04/10/2002 7:55:34 PM Eastern Daylight Time, mkurta@adelphia.net writes: > Yes compressor! Invaluable for cleaning actions (outside the building) > as well as individual small parts. Also useful in many other ways besides > refinishing such as extracting and driving tuning pins, grinding operations, > blowing up tires, air mattresses and kids toys. If you have compressed air, > you will find many uses for it. I'd suggest the highest CFM (cubic feet per > minute) output you can get in a 110V machine. Harbor Freight has a wide > selection at the right prices. Mike Kurta > Hi, You left out sand blasting action parts,you're exactly right though,I would be lost without my compressor.I have a 6 hp 60 gallon Craftsman,which I have enjoyed.Also be sure and fix a place outside the shop for it,not hearing the noise is wonderful. Hazen Bammister ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/d0/2d/0f/4f/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC