Unglued Hammerheads (Clamping)

HazenBannister@cs.com HazenBannister@cs.com
Sun, 14 Apr 2002 23:14:37 EDT


---------------------- multipart/alternative attachment
In a message dated 04/14/2002 9:21:29 PM Eastern Daylight Time, 
jonpage@attbi.com writes:


> I wouldn't trust hot melt glue for anything beyond craft projects.  To 
> secure expanded hammer heads,
> CA and white glue. Snap, Crackle, Pop. I have two small Vise-grips and 
> leave one clamped while I glue
> another. I don't recall if putting the CA on the felt or molding is more 
> effective.
> 
> 

Hi list,
 There has to be an art to using CA glue.I usually can't get it to glue 
anything but,all over my fingers.What brand does everyone use?
Thanks,
Hazen Bannister 

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/35/a5/a2/78/attachment.htm

---------------------- multipart/alternative attachment--


This PTG archive page provided courtesy of Moy Piano Service, LLC