Welcome, Personaly, I have always liked those old Chickerings. Sounds like maybe everything is original as they did use iron windings back then. And the stamped-steel damper heads were (AFAIK) a Chickering "innovation"... Tip: Get yourself a looping tool if you don't already have one...; ) Best, Greg Torres ----- Original Message ----- From: "Tyler Punky Smith" <macman@pathfinder.dnsalias.com> To: <pianotech@ptg.org> Sent: Sunday, April 21, 2002 2:51 PM Subject: 1907? Chickering upright > I'm thinking about picking up (for a little of nothing from Goodwill) > an early-1900's (from the piano atlas) Chickering upright to > partially rebuild (I don't intend to remove the plate) for the > experience. (I'm a student) It's a cute piano and I think it'll be > rather nice when I'm done with it. The bass is strung with iron-wound > strings, and the entire scale is tied strings, three tied strings per > treble note. I think it should be interesting. > > Can anyone tell me anything about it, especially did it come from the > factory with iron wound strings, or were the original copper ones > replaced somewhere along the way? Also, the damper heads are little > steel stampings instead of wooden blocks like I'm used to seeing. Is > this original? > > Thanks a lot, I'm new to the list. > > -Tyler Smith, > macman@pathfinder.dnsalias.com
This PTG archive page provided courtesy of Moy Piano Service, LLC