Blocking hammers

[Greg Newell]

---------------------- multipart/alternative attachment
Hazen,
    You overlooked the growing action brackets. You should still have
time to call Don Mannino with the serial number and he will send out new
action brackets which you will then install and bill Young Chang America
for your labor to do so. A common problem but if you've never seen it
before it's a bit of a head scratcher. Have fun!!!

Greg



HazenBannister@cs.com wrote:

> Hi list,
> I went to a Youg Chang today,about 10 years old,for a tuning.I tuned
> it once about 3 or 4 years ago.I got there and every hammer was
> blocking,I'm not talking about buzzing,but major blocking.I did'nt
> have enough time to get into it as I had an appointment conflict.So
> I'm going back tomorrow to fix this ,pitch raise ,clean,and tune.(it's
> a grand with a piano-disc system).I checked to see if any rails were
> loose,or might have shifted,is there anything I should look for,maybe
> with the player system?I changed letoff on a few notes,and it quit
> blocking,but I sure had to twist them a mile,it has the dowel type.It
> also has excessive keydip.I guess I should go through one note and
> completely regulate,I am just checking to see if  there's something
> obvious,maybe I've overlooked.
> Thanks in advance,
> Hazen Bannister

--
Greg Newell
mailto:gnewell@ameritech.net


---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/76/88/eb/7f/attachment.htm

---------------------- multipart/alternative attachment--