This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment David, if you are really working on a G2, it's a lot more than two years = old. Did you mean a C2?=20 If the piano has really been getting that kind of use, are the = hammers starting to get a little flat up near the capo bar? Steaming is = fine, but if the hammers are through and through hard, you'll get better = results from and little deep needling down on the shoulders and sides of = the hammer. Don't mean to butt in here, though.=20 ----- Original Message -----=20 From: David Ilvedson=20 To: pianotech@ptg.org=20 Sent: Thursday, August 22, 2002 11:37 PM Subject: Re: Singing Samick Roger, You had an article on steaming in a recent Journal, right? I'm = considering trying it on a 1 year old Yamaha G2 that has already begun = breaking strings in the treble....hotel lounge with big bands and = probably no monitor for the piano... David I. ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/4a/6a/7a/f8/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC