First, pull the action and check the key bed for flatness with a 4 foot straight edge. Hardware stores have aluminum rulers about two inches wide, 1/8 thick and four feet long for less than ten dollars. Carl Meyer Assoc. PTG Santa Clara, California cmpiano@attbi.com ----- Original Message ----- From: "Stéphane Collin" <collin.s@skynet.be> To: <pianotech@ptg.org> Sent: Tuesday, August 27, 2002 8:42 AM Subject: wraped keybed Hello list. Is there a way to cure a wraped keybed in a grand piano ? There is about 1 cm gap between the front of the action and the keybed. Should I add some material under the action frame? Thanks for any idea. Stéphane Collin.
This PTG archive page provided courtesy of Moy Piano Service, LLC