Hi Carl. The keybed is definetly not straight. The action frame, though, is. Stéphane Collin. ----- Original Message ----- From: "Carl Meyer" <cmpiano@attbi.com> To: <pianotech@ptg.org> Sent: Tuesday, August 27, 2002 8:06 PM Subject: Re: wraped keybed | | First, pull the action and check the key bed for flatness with a 4 foot straight edge. Hardware stores have aluminum rulers about two inches wide, 1/8 thick and four feet long for less than ten dollars. | | Carl Meyer Assoc. PTG | Santa Clara, California | cmpiano@attbi.com | | | | ----- Original Message ----- | From: "Stéphane Collin" <collin.s@skynet.be> | To: <pianotech@ptg.org> | Sent: Tuesday, August 27, 2002 8:42 AM | Subject: wraped keybed | | | Hello list. | | Is there a way to cure a wraped keybed in a grand piano ? There is about 1 cm gap between the front of the action and the keybed. Should I add some material under the action frame? | Thanks for any idea. | | Stéphane Collin. | | | | |
This PTG archive page provided courtesy of Moy Piano Service, LLC