If you are looking for plugs for pinblocks, give Webb Phillips a call 1-888-622-7426 (888-MAC-PIAN-O) Mike ----- Original Message ----- From: "Joseph Garrett" <joegarrett@earthlink.net> To: <pianotech@ptg.org> Sent: Wednesday, August 28, 2002 11:57 AM Subject: Plugs/Mike Kurta > Mike, > I just scanned the Rockler Woodworking & Hardware site. Didn't see anything > in there that was all that pertinent to pianos. The type of "plugs" I use > are made out of pinblock stock/Maple/Beech and are at least 1 1/4" long! > "Fluted" plugs etc. are hardly ever used for serious piano work, IMHO. > Best Regards, > Joe Garrett, RPT, (Oregon) > > Been There, Didn't Like It, So I'm Here To Stay! [G} > >
This PTG archive page provided courtesy of Moy Piano Service, LLC