This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Well,=20 I have dug into an old Kimball upright that is going to be my practice = piano for repairing. A question I have is about cleaning = corrosion.....how? Today I am referring to the metal frame in the = action. I have completely stripped the action, and want to the clean up = the metal frame parts. Somebody in the past had dabbed on with a brush = as far as I can tell, silver paint to hide the corrosion. I thought an = electric drill with a wire brush was overkill, and would damage the wood = parts, a Dremel tool seems like it will hardly put a dent in the job. = That leaves steel wool? Or a hand wire brush. Thanks. Tom ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/9d/64/67/6a/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC