List, What's a silent piano (Yamaha)? I just got a call to tune one and I let on that I knew all about them. Is there anything different about them that I should know about to tune them? I'd appreciate any "inside" information. Phil Ryan Miami Beach, FL (no snow here) Home of the #1 Hurricanes ----- Original Message ----- From: "Wilsons" <wilson53@Marshall.edu> To: <pianotech@ptg.org> Sent: Thursday, January 03, 2002 5:02 PM Subject: Re: Epoxy > I believe this is the one. > > Wally Wilson, RPT > > At 09:18 PM 1/3/02 -0600, you wrote: > >Hi > > > >Is this the place? > > > >Leichtung Tool Works > > Leichtung Workshops > > Orders: (800) 321-6840 (24 hours) > > 1108 Glenn Road > > Casper Wy. 82601 > > > >At 04:43 AM 1/3/02 -0500, you wrote: > >> David et al: > >> > >> "" I like West for most applications; but for cracks in bridges > >>this stuff is gold. > >> > >> > >> Ravenswood, WV > >> Columbus, OH Chapter > >> > >> At 08:02 AM 1/2/02 -0800, you wrote: > >> Isaac: > >> > >> My use is similar to yours. I have used epoxy for securing cracked bridge > >>caps when recapping was not an option. In this case I have several > >>hairline cracks that I would like to seep some epoxy into and need a thin > >>solution. I would prefer not to have to mess with heating up the bridge > >>cap to thin out a higher viscosity product. I agree with a previous post > >>that CA glues are not the right stuff in spite of the marketing claims. > >>They break down over time with exposure to alkaline environments and are > >>really designed to hold non porous surfaces together with a very very thin > >>application. Or at least so I am told by my museum conservator glue > >>authority friend. > >> > >> David Love > >> > >> > >>> ----- Original Message ----- From: Isaac OLEG SIMANOT To: > >>>pianotech@ptg.org Sent: January 01, 2002 11:15 PM Subject: RE: Epoxy > >>> > >>> Hello, David. "" . I bought European epoxy you surely will not find > >>>The consistence is in Brookfield , mine was 600 +-100, with a 50 min pot > >>>life , takes 5 days to be hard. Different hardeners can be used on mine, > >>>giving different viscosity. I used it to reinforce an old cap on a > >>>little grand, was 3 years ago, worked fine. it really dripped in the > >>>wood. This epoxy is used for marine works (surf, boats) and planes. Ask > >>>for the specification regarding the shore and the elasticity modulus of > >>>the product. I may admit I am totally unsure of how it will hold in time. > >>>My cap was not broken, just the little habitual cracks. I washed the > >>>excess with acetone and inserted new bridge pins. Did not like the mess > >>>of washing the cap , but it was not so hard. May be some graphite can be > >>>added in the top coating, but I doubt it will allow for a really good > >>>string rendering . I wondered that if string rendering is poor, if that > >>>does not conduct to bridge roll condition sooner or later ? What do you > >>>think ? Regards. Isaac OLEG -----Message d'origine----- De : > >>>owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]De la part de > >>>David Love Envoyé : mercredi 2 janvier 2002 06:51 À : Pianotech Objet : > >Epoxy > >>> > >>> I keep hearing mention of an epoxy that is the consistency of water. > >>>Who makes this product and where can I get it. David Love > >> > >> > >> > >> > >> > > > >Regards, > >Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T. > > > >mailto:drpt@sk.sympatico.ca > >http://us.geocities.com/drpt1948/ > > > >3004 Grant Rd. > >REGINA, SK > >S4S 5G7 > >306-352-3620 or 1-888-29t-uner > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC