Hi Joe Joe have you any thoughts about covering the surface of a sound board ,which in better instruments should be quality tonewood ,with a soft covering such as Spar varnish or Varathane.One of the reasons quality varnish was used on fine instruments was its ability to become hard. Regards Murray ----- Original Message ----- From: "Joseph Garrett" <joegarrett@earthlink.net> To: <pianotech@ptg.org> Sent: Thursday, January 10, 2002 11:19 PM Subject: Varathane/David Love ? > David, > Varathane is solvent based Polymer varnish of the highest grade. I like to > use it as it remains flexible as opposed to regular varnish and lacquer that > gets very hard with age. I use a satin grade and with the 4/0 steel > wool/carnuba it comes out with a nice buff sheen. > Joe > >
This PTG archive page provided courtesy of Moy Piano Service, LLC