---------------------- multipart/alternative attachment In a message dated 1/11/02 12:00:54 PM Central Standard Time, mfarrel2@tampabay.rr.com writes: > Can I cut the bushings at the key bottom and not have any flap - > Terry Yes, this is the easiest and best way to do it. There is no reason for the flap, other than when keys are bushed in the factory, there is a flap. They probably found that in the process of cutting out the mortise to receive the bushing, it was faster to add a little cut out for the flap, than to pay someone to cut the ends off the bushing cloth. Now you're stuck with that the job. Wim ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/ab/43/51/fe/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC