---------------------- multipart/alternative attachment Thank you very much Dale!!! Greg Erwinspiano@AOL.COM wrote: > . Terry ,Greg > > I have sent off four pictures but have had some > trouble getting them to go thru. Check in the A:M. I'll try again > monday if not. > > >>>>>>>>>>>>>>>Dale > > >> >> >> Dale, >> I would too! Greg Farrell wrote: >> >> > I would sure like to see what set up you use. Thanks Dale. Terry >> > Farrellmfarrel2@tampabay.rr.com >> > >> >> ----- Original Message ----- >> >> From: Erwinspiano@AOL.COM >> >> To: pianotech@ptg.org >> >> Sent: Sunday, January 27, 2002 10:24 AM >> >> Subject: Re: Mazzaglia Tools/Rib Crowning Jig >> >> In a message dated 1/26/2002 9:44:21 PM Pacific Standard Time, >> >> roy.peters@mindspring.com writes: >> >> >> >> >> >> >> >> > Subj:Re: Mazzaglia Tools >> >> > Date:1/26/2002 9:44:21 PM Pacific Standard Time >> >> > From:roy.peters@mindspring.com >> >> > Reply-to:pianotech@ptg.org >> >> > To:pianotech@ptg.org >> >> > Sent from the Internet Roy >> >> > >> >> >> >> Many of us a table saw jig that is way >> >> more versatile than a fixed 60 ft. radius router jig. If you >> >> interested I'll post some pictures later I'm off to church just >> >> now> >> >> >>>>>>>>>>>>>Dale Erwin >> >> >> >> >> >> > >> >> > Speaking of Mazzaglia... Have any of you used his rib crowning >> >> > jigs for >> >> > a router? They look like a good idea, I'm wondering how well >> >> > they work >> >> > in practice. I could make something similar, but might prefer >> >> > to just >> >> > buy it. >> >> > Roy Peters >> >> > Cincinnati >> >> >> -- >> Greg Newell >> mailto:gnewell@ameritech.net >> > > > -- Greg Newell mailto:gnewell@ameritech.net ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/37/36/18/2a/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC