This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Wim: Let me be more specific. The sets of Sanderson strings that I have used = seem to require no twisting (in fact they don't suggest doing it). A = set of GC strings I put on recently required two full twists in the = tenor (tenor bridge) before coming to life. Why is that? Does that say = anything as to the method of wrapping the string? =20 David Love ----- Original Message -----=20 From: Wimblees@AOL.COM=20 To: pianotech@ptg.org=20 Sent: January 29, 2002 6:16 AM Subject: Re: Twisting bass strings In a message dated 1/29/02 4:49:01 AM !!!First Boot!!!, = davidlovepianos@earthlink.net writes:=20 Why is it that some bass strings need to be twisted to achieve their = full tonal potential and some don't?=20 David Love=20 This is what I think. The extra twist put a little more pressure in = the windings, enough to make the winding tight around the core wire. A = tighter fit gives a more solid sound. This, I think, is the same effect = as tightening all the screws on the plate, or understructure. A more = sold piano give a better tone. There is no energy lost between parts.=20 As I said, that is my interpretation. I could be wrong.=20 Wim=20 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/87/cb/7e/09/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC