Hi Avery, Try a heavy duty soldering iron, and heat the pin, it should then be looser, when it cools. Then use a broken pin extractor, as sold by APSCO or Schaff. It cuts into the tuning pin making left hand threads. Regards, John M. Ross Windsor, Nova Scotia. jrpiano@win.eastlink.ca ----- Original Message ----- From: "Avery Todd" <avery@ev1.net> To: <pianotech@ptg.org> Sent: Thursday, January 31, 2002 7:25 AM Subject: Broken TP > List, > > Anyone have a good way to extract a broken tuning pin > on a new Baldwin Hamilton? There's about 1/4"+ still > extending beyond the plate but it's EXTREMELY tight > in the block! > > I've never had this happen to me and actually, this > information is for another tech. Any brilliant ideas > out there? Thanks. > > Avery > >
This PTG archive page provided courtesy of Moy Piano Service, LLC