Thank you, Master! Thank you for explaining that. I, of course, have seen keytops sunk down into every crevice of the key and wondered what caused this miraculous thing. James Baker (Grasshopper) > James; > Back in the days when Dinosaurs still roamed the earth, and Jack Wyatt was a > young man, a mixture of keytops melted in Acetone was used to apply new > keytops. This was used in the factory as well as in the field. Long after the > factories stopped using the stuff individual techs stilled used it and many > still do. > For the old 'pyralin' keytops it worked very well but if you used too much > acetone, vs keytop material, the tops would 'suck' down into any holes in the > keytop...........this gives the effect of 'dimples' which you are probably > used to seeing and wondering where they came from...... :-) The 'new' molded > keytop material is more susceptible to this dimpling than the old pyralin and > that is one reason the thingees are so danged thick............... > > <<"but the piano > > world is new, wonderful and strange in my eyes">> > May it ever remain such Butterfly.............. > anon..............
This PTG archive page provided courtesy of Moy Piano Service, LLC