was sluggish butts/ now verdigris

[JIMRPT@AOL.COM]

In a message dated 15/07/02 6:20:53 PM, Tvak@AOL.COM writes:

<< How can I identify verdigris?  The bushing is red, not discolored.  The 
pin, 
when removed, does have a blackish ring where it was in contact with the 
bushing. >>

Tom this sounds more like a plating problem than it does verdigris... get a 
good magnifying glass and examine a couple of pins and 
bushings........besides verdigris is always green. :-(     If it is a plating 
problem than repinning/reaming will solve the problem permanentely.
Jim Bryant (FL)