Pin Bushings-Yamaha Tip of the Month

[Gordon Holley]

Thanks Newton, that now makes sence.  Appreciate the response.
Gordon
On 29 Jul 2002 at 12:14, Newton Hunt wrote:

> Yamaha bushings do not have a hole through.  The dipple is a guide for
> drilling the bushing and block at the same time.
> 
> 		Newton
> 
> Gordon Holley wrote:
> > 
> > Hi List.  Just finished installing pin bushings in a plate and then
> > read an old "Tip of the Month" from the January 1998 Journal.  Yamaha
> > said that when installing the bushings their sorter knows when the
> > bushing is "dimple" side up.  I 'm looking at two bushings and find
> > no difference on either end of the bushings.  Is this something that
> > Yamaha has on their bushings and that bushings from Schaff would not
> > have, and should their be any concern?.  Regards, Gordon Holley,
> > Goshen, Indiana.