Water-Base Laquer

[Farrell]

The stripper I use is very NASTY methylene chloride based stuff. But it is happy to be washed off with water. I wish I could tell you why. It works quite well though. I have tried one type of "natural orange stripper" and it performed poorly. I have four gallons of that still. You want it?

Terry Farrell
  
----- Original Message ----- 
From: <Erwinspiano@AOL.COM>
To: <pianotech@ptg.org>
Sent: Monday, June 03, 2002 9:24 PM
Subject: Re: Water-Base Laquer


> In a message dated 6/3/2002 4:13:56 PM Pacific Standard Time, 
> mfarrel2@tampabay.rr.com writes:
> 
> 
> > Subj:Water-Base Laquer, was: Chemical resistant gloves 
> > Date:6/3/2002 4:13:56 PM Pacific Standard Time
> > From:<A HREF="mailto:mfarrel2@tampabay.rr.com">mfarrel2@tampabay.rr.com</A>
> > Reply-to:<A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A>
> > To:<A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A>
> > Sent from the Internet 
> > 
> >         Terry
> 
>   Thanks for the web site. I think this thread on strippers went round before 
> but, I'll ask anyway as to the effectiveness of these water based strippers 
> compared to the chemical nasty ones I use.
>   By the way I was at Jon pages shop two weeks ago and I was very sold on the 
> ebony finish he had done in water based lacquer.
>   Thanks>>>>Dale Erwin
> 
> > 
> > http://www.homesteadfinishing.com/
> > 
> > http://www.homesteadfinishing.com/oxford.htm
> > 
> > The first link is Homestead Finishing home page, the second their page 
> > addressing Oxford products. I had bought a 10 gallons of a stripper that is 
> > water-washable and just didn't know much about those that might require 
> > solvents to clean up the stripper mess.
> > 
> > Terry Farrell
> >   
> 
>