This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hello, When you regulate the springs, in any direction, you have to gently massage (the other direction) them so they stabilize. That settle the metal immediately, as it will do naturally itself with a little time (leaving the springs less strong than you regulated them in a short time). That is may be a part of the problem you had. Beside , having the springs so low than repetition is poor is very rare. And the pinning is changing of course too. Regards. Isaac OLEG -----Message d'origine----- De : owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]De la part de Wimblees@AOL.COM Envoye : jeudi 6 juin 2002 16:50 A : caut@ptg.org; Pianotech@ptg.org Objet : rep springs I have been taught (and it says so in the regulation manuals), that the rep springs should be adjusted so that there is a "gentle rise," when you let up on the key. This winter I regulated all of the main pianos in the school, including the piano faculty pianos, with the rep spring set to give me that "gentle rise." Now, all of a sudden, piano players are complaining about poor repetition, and when I check out the pianos, there is almost no rise at all. Once upon a time I heard that the springs will change with the change in weather. But what is happening? How come all of my rep springs are flat? Inquiring minds want to know. Wim ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/9b/f1/da/96/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC