I like the repetition lever to come up smartly and contact the drop screw fully, but now bounce off it. If it bounces on the drop, it's too strong. dave *********** REPLY SEPARATOR *********** On 6/6/02 at 6:06 PM Farrell wrote: >Oops - I meant just short of where you get a prominent feeling in the key. > >Terry Farrell > >----- Original Message ----- >From: "Farrell" <mfarrel2@tampabay.rr.com> >To: <pianotech@ptg.org> >Sent: Thursday, June 06, 2002 5:53 PM >Subject: Re: rep springs > > >> I don't know how to play the humidity game, but my understanding is that >you want them to pop up smartly, but just short of jerking up, where you >get a prominent feeling in the key. >> >> Fairly quick pop up, but no significant bump felt in key. Is that a good >guide? >> >> Terry Farrell >> >> ----- Original Message ----- >> From: <Wimblees@AOL.COM> >> To: <caut@ptg.org>; <Pianotech@ptg.org> >> Sent: Thursday, June 06, 2002 10:50 AM >> Subject: rep springs >> >> >> > I have been taught (and it says so in the regulation manuals), that >the rep >> > springs should be adjusted so that there is a "gentle rise," when you >let up >> > on the key. This winter I regulated all of the main pianos in the >school, >> > including the piano faculty pianos, with the rep spring set to give me >that >> > "gentle rise." Now, all of a sudden, piano players are complaining >about poor >> > repetition, and when I check out the pianos, there is almost no rise >at all. >> > >> > Once upon a time I heard that the springs will change with the change >in >> > weather. But what is happening? How come all of my rep springs are >flat? >> > Inquiring minds want to know. >> > >> > Wim >> > _____________________________ David M. Porritt dporritt@mail.smu.edu Meadows School of the Arts Southern Methodist University Dallas, TX 75275 _____________________________
This PTG archive page provided courtesy of Moy Piano Service, LLC