Thank you Roger. I'll try this. Stéphane Collin. ----- Original Message ----- From: "Baldwin Yamaha Piano Centre" <baldwin@mta-01.sk.sympatico.ca> To: <pianotech@ptg.org> Sent: Thursday, June 13, 2002 7:17 PM Subject: Re: worn keys | Hi Stephane, | We router off the required amount of material off | the side, making sure the sides of the key stick is parallel, then build up | the sides with iron on Birch veneer. The birch gives a nice clean white | look to the key sides, and is much harder than the original material. | Hope this helps | Roger | | | At 06:54 PM 6/13/02 +0200, you wrote: | >Hi list. | > | >Does anyone have a good trick to restore keys whose sides are worn, and | >who no longer have the right width ? I mean that the wood on the sides of | >the keys has been worn by intensive playing. | > | >Thanks to all. | > | >Stéphane Collin. | | Roger | |
This PTG archive page provided courtesy of Moy Piano Service, LLC