A trick that works with PianoDisc is to use the keyslip to press down all of the keys simultaneously. this obviously lifts the ends and the action slides in with no damage to solenoids. I'm not familiar with Concertmaster but I would think it is similiar with regards to solenoids. Phil Romano Myrtle Beach, SC ----- Original Message ----- From: "Robert A. Anderson" <fandango@dakotacom.net> To: "Pianotech Digest" <pianotech@ptg.org> Sent: Monday, June 17, 2002 2:48 AM Subject: Baldwin Concertmaster > I tuned my first Baldwin Concertmaster grand recently, and I would like > to remove the action for basic servicing. I can see that there is one > connector to remove. The only written instruction is to reinstall the > action straight so as not to break any solenoids. Could someone who has > serviced these warn me about any pitfalls or tell me any precautions I > should take in performing normal action work? > > Thanks, > > Bob Anderson > Tucson, AZ >
This PTG archive page provided courtesy of Moy Piano Service, LLC