removing plate

JIMRPT@AOL.COM JIMRPT@AOL.COM
Sat, 22 Jun 2002 19:08:00 EDT


In a message dated 21/06/02 6:37:45 PM, Wimblees@AOL.COM writes:

<< "So these 2x4's are long enough so that when you tilt them, the can reach 
the 
ground?">>
Yessir...

<<" Do you stand in front of the plate, or stay behind it? ">>
You kinda have to be behind the plate to pick up the baords/plate and that is 
where you can control the descent of the plate with the strap/rope.

If, as you say, you don't have room for an engine hoist this idea probably 
won't work for you either...
Jim Bryant (FL)



This PTG archive page provided courtesy of Moy Piano Service, LLC