Keith, Brass flanges. Stuart, Florida, just north of West Palm Beach, Fl. Tom Servinsky ----- Original Message ----- From: "Keith Roberts" <kpiano@goldrush.com> To: <pianotech@ptg.org> Sent: Wednesday, March 06, 2002 9:11 PM Subject: Re: Mason& Hamlin upright action restoration > Does it have brass rails or the Billings brass flanges? Where are you > located at? > Keith R > ----- Original Message ----- > From: "Tom Servinsky" <tompiano@gate.net> > To: <pianotech@ptg.org> > Sent: Wednesday, March 06, 2002 3:31 PM > Subject: Mason& Hamlin upright action restoration > > > > List > > I have a customer with an early 1900's full Mason & Hamlin upright which > > needs a complete action restoration. I do very little work on uprights > > anymore, especially one with brass flanges. I'd rather turn this over to > > someone who has a lot of experience in restoring brass flange actions. > > I'm looking for someone to overhaul the action (wippens, if available, > > hammer butts, shanks, hammers, and new brass rails if needed). > > Would appreciate any assistance. > > Tom Servinsky,RPT > > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC