---------------------- multipart/alternative attachment At 07:52 AM 3/13/2002 -0800, you wrote: >I am considering converting a Bechstein Rocker Arm capstan arrangement >(1910, IV) to a standard capstan configuration. Any suggestions or >warnings before I pursue it further. > >David Love > Get a Bechstein offset screw driver. Why change it? Once a hammer line is set, it is stable. The friction with this system is lower than a capstan system. Unless the wippens are not useable, I'd keep them. Regards, Jon Page, piano technician Harwich Port, Cape Cod, Mass. mailto:jonpage@attbi.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/6a/1b/14/4b/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC