>I'm cleaning a set from an old M&H. > >The brass is so soft that even the slightest pressure has the tool digging >deeply into the metal. >Is burrs can easily be carved off with an Exact knife, it's so soft. > >I'd like to just replace them but the threads mic' at .280" (9/32). > >Stuck between a rock and a soft place... >Regards, > >Jon Page, piano technician >Harwich Port, Cape Cod, Mass. Hi Jon----my friend Brian Alexander (76251.2664@compuserve.com) has a good method. Talk to him. David Andersen
This PTG archive page provided courtesy of Moy Piano Service, LLC