Well, Joe, Did you bend over to roll up your pants leg (before it gets TOO deep) and haven't done the other one yet??????? Avery At 11:31 AM 04/01/03 -0700, you wrote: >Hummmm, >Why is it that my left leg seems to be a little longer than my right one >since reading the proceding post? >Joe Goss >imatunr@srvinet.com >www.mothergoosetools.com >----- Original Message ----- >From: "Richard Moody" <remoody@midstatesd.net> >To: "Pianotech" <pianotech@ptg.org> >Sent: Tuesday, April 01, 2003 9:36 AM >Subject: OT ---Old Piano Plates Wanted > > > > It has been discovered that certain trace elements are abundant > > in some old piano plates (1890-1910). > > > > Because of global politics an eminent shortage of these metals is > > expected in the US. > > > > These old plates could be worth $200 (picked up still in old cases > > !!!) or $1,000 if delivered clean. > > > > I know this sounds fantastic but in checking it out, the deeper I > > get the more sense it makes. It seems the formulation of this > > particular cast iron from this period saves the steel mills > > enormous amounts of time by simply melting them down rather than > > starting from scratch. > > > > If the plate has a one or a four anywhere on it (usually at the > > tail) it may be valuable. If the plate has numbers that appear > > alone or by themselves or in any configuration of numbers like > > x 04 x x 01 x, they may be especially valuable. > > > > PLEASE NOTE: These plates will only be purchased from members of > > the trade, RPTs preferred. (there is always a catch,esp when it > > appears too good to be true) ; ) > > > > If you need further details please get in touch. > > > > > > > > > > _______________________________________________ > > pianotech list info: https://www.moypiano.com/resources/#archives > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC