floating the soundboard at the top

Delwin D. Fandrich pianobuilders@olynet.com
Tue, 1 Apr 2003 23:05:55 -0800


----- Original Message -----
From: "Joseph Garrett" <joegarrett@earthlink.net>
To: <pianotech@ptg.org>
Sent: Tuesday, April 01, 2003 3:22 PM
Subject: floating the soundboard at the top


> Del,
> I went back and re-read your response. I think I see MY error. You
referred
> to the long bridge as the "tenor bridge"! Thus, I assumed that you were
> talking about the "tenor" area as where you were referring to. My mistake.
> (I think?) Kinda cornfusin.
> Best Regards,
> Joe Garrett, RPT, (Oregon)
>

You would prefer...what? The tenor/treble bridge? Gets cumbersome after a
while. Besides, considering the frequencies involved the piano really
doesn't have much of a true "treble." Rather more like a long mid-range. So,
how about the "long bridge?" Might be better. At least it differentiates it
from the "short" bridge down at the other end. How about "the upper end of
the long bridge."

Del


This PTG archive page provided courtesy of Moy Piano Service, LLC