Leather key bushings

Don pianotuna@accesscomm.ca
Wed, 02 Apr 2003 07:40:27


Hi Terry,

I don't know. But I do know I have occaisionally found a piano where the
sluggishness was caused by friction at that location.

At 06:01 AM 4/2/2003 -0500, you wrote:
>How could the front rail pin "travel" twoard the player?
>
>Terry Farrell
>  
>----- Original Message ----- 
>From: "Don" <pianotuna@accesscomm.ca>
>To: "Pianotech" <pianotech@ptg.org>
>Sent: Tuesday, April 01, 2003 11:13 PM
>Subject: Re: Leather key bushings
>
>
>> Hi Phil,
>> 
>> Sometimes the front rail pin "travels" towards the player and ends up
>> rubbing against the wood. Or perhaps it is the balance rail going towards
>> the strings. In any event check for this before you "squeeze". Best of
>> Luck! Let us know how it goes.
>> 
>> At 09:58 PM 4/1/2003 -0500, you wrote:
>> >I've got a job tomorrow easing sticking keys at the front rail pin.  It
>> >looks like the bushings are leather.  It's a hundred (plus) year old
German
>> >grand piano.  Is there something I should/could do differently than I
>> >would/should with cloth bushing?  I plan to use a bushing pliers and maybe
>> >some Protek.
>> >
>> >Phil Ryan
>> >
>> >
>> >
>> >_______________________________________________
>> >pianotech list info: https://www.moypiano.com/resources/#archives
>> >
>> >
>> 
>> Regards,
>> Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T.
>> 
>> mailto:pianotuna@accesscomm.ca
>> http://us.geocities.com/drpt1948/
>> 
>> 3004 Grant Rd.
>> REGINA, SK
>> S4S 5G7
>> 306-352-3620 or 1-888-29t-uner
>> _______________________________________________
>> pianotech list info: https://www.moypiano.com/resources/#archives
>_______________________________________________
>pianotech list info: https://www.moypiano.com/resources/#archives
>
>

Regards,
Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T.

mailto:pianotuna@accesscomm.ca
http://us.geocities.com/drpt1948/

3004 Grant Rd.
REGINA, SK
S4S 5G7
306-352-3620 or 1-888-29t-uner

This PTG archive page provided courtesy of Moy Piano Service, LLC