Alan, I thank you for your time and information! From the caller's description, I really didn't get a picture of what he was talking about. I really appreciate your input as it gives me more info. as a tech for next time. Good to hear from you! Sincerely, Tom Dickson >From: "Alan Forsyth" <alanforsyth@fortune4.fsnet.co.uk> >Reply-To: Pianotech <pianotech@ptg.org> >To: "Pianotech" <pianotech@ptg.org> >Subject: Plastic pegs >Date: Fri, 4 Apr 2003 21:51:04 +0100 > >"Anyway, the owner says that there are "plastic pegs" in the back of the >key, >underneath. These go into some type of aluminum channel." > > >These pegs are spring loaded with a plate spring. After ten years the >plastic gives up - polarizes - unable to take the spring tension. This was >the main problem with the Rippen or Lindener pianos. They had a totally >plastic keyboard and those pegs replaced the conventional balance rail >pins. >You might be able to salvage pegs from scrapped pianos, but plastic being >plastic they will not last very long. If you do find spares and try and >insert them you will probably end up breaking a whole lot more than you >started with because you cannot remove the clips from the neighbouring keys >without breaking them. These pianos were an engineers piano, very ingenious >and innovative design. I believe they were of Swedish design, parts made in >Holland and assembled at Shannon Airport in Ireland in the 70's. >Best to stay clear of this one! > >Regards >Alan Forsyth FWIW, BTW, IMHO >Edinburgh > > > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives _________________________________________________________________ MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*. http://join.msn.com/?page=features/virus
This PTG archive page provided courtesy of Moy Piano Service, LLC