Location of "Blind" dowels / Steinway Pinblock removal

Wimblees@aol.com Wimblees@aol.com
Sun, 20 Apr 2003 16:35:21 EDT


---------------------- multipart/alternative attachment
In a message dated 4/19/03 8:05:30 PM Central Daylight Time, 
mfarrel2@tampabay.rr.com writes:

> Don't you potentially tear up the inner surface of the stretcher using that 
> method?
> 
> Terry Farrell
>  
> 

Not on pianos made after the 1920's They put a strip of veneer between the 
stretcher and the pin block. Before that they pin block was glued directly to 
the stretcher, and getting those babies out is a pain.

Wim 

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/1b/3a/ff/34/attachment.htm

---------------------- multipart/alternative attachment--

This PTG archive page provided courtesy of Moy Piano Service, LLC