---------------------- multipart/mixed attachment Terry, You can stain, sure, but start with an anneline or a water based dye first. That will help make the color much more even. Greg At 03:23 PM 4/26/2003, you wrote: >Refinishing question. I started stripping a piano - the typical reddish >stained mahogany. The finish was original. I have always used chemical >strippers before but I am trying scraping this time. The scraping seems to >go easy and well, except that you end up with some areas of stain largely >removed and some areas remaining, resulting in a blotchy appearance. I >have sanded, and that helps a little, but it is still blotchy and sanding >is tough because the sandpaper just loads up in three seconds flat. > >My guess is that when I re-stain (will be going with a similar color) some >blotchyness will remain. Using chemical strippers in the past has yielded >fairly even-colored wood to work with - so I don't really know what will >happen if the blotchy color is stained. Anyone with any experience with >this? Recommendations? Thanks. > >Terry Farrell > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives Greg Newell mailto:gnewell@ameritech.net ---------------------- multipart/mixed attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC