This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Dave, and list, I tried the Downy method only once, on my own piano. It certainly = de-brightened the tone the way I wanted it to, but shortly afterwards I = noticed the string grooves in the bass section had turned green. Other = techs in my chapter said this never happened to them, so maybe it was = just concidence. Nevertheless, I would recommend caution with this = method. just my 2 cents Mike Spalding RPT ----- Original Message -----=20 From: David M. Porritt=20 To: pianotech@ptg.org=20 Sent: Sunday, April 27, 2003 9:10 AM Subject: Re: lacquer softener Fabric softener (1 part) and isopropyl alcohol (7 parts) works very = well. dave *********** REPLY SEPARATOR *********** On 4/25/2003 at 9:06 PM Dave Nereson wrote: What can one use to soften hammers that were lacquered at the = factory? At first I thought lacquer thinner, but wouldn't that just = evaporate and leave them still hard? Tried a voicing needle and broke = three of them. The voicing tool just will not go in. Tempted to go to = the vise-grips extreme. Surely the wonderful world of chemistry offers = some liquid I can drizzle on them. ?? --David Nereson, RPT _____________________________ David M. Porritt dporritt@mail.smu.edu Meadows School of the Arts Southern Methodist University Dallas, TX 75275 _____________________________ ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/e6/22/1d/db/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC