Hi, No plans or prints but, Hammer rest rail full Hammer rest rail half Sustain bass Sustain all dampers Apartment mute Banjo mute bell mute ( little tiny bells struck by the hammers just before the hammer hits the string) are ones that I have seen on Wingers Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "Robert Goodale" <rrg@unlv.edu> To: "Pianotech" <pianotech@ptg.org> Sent: Monday, April 28, 2003 1:05 AM Subject: Re: Wing & Son upright blueprints > Wing & Sons are marvelous pianos and exemplify some of the finest uprights > ever built. Many W & Ss have sever pedals. At least one would operate a > rinky tink, and one for a mute rail. There were other devices available but > I'm not sure if I can name them with any accuracy They generally involved > some limited kinds of string contact to change the tone or intentionally > create buzzes or sympathetic vibrations. I would really like to rebuild a > Wing someday and I tried to secure one a few years ago. It was in a storage > area owned by a dealer and in spite that I had requested it be held for me I > later discovered that it had been thrown out. No one volunteered for the > responsibility. A very sad waste and oversight. > > Rob Goodale, RPT > Las Vegas, NV > > > > Hello list, > > > > I'm back from a long absence from the list with a new email name. I'm > > rebuilding a Wing & Son upright serial #31000. It has 5 pedals and > missing > > all the components. Where can I go for a source of the blueprints of the > > pedal functions? > > > > Jay Mercier > > Twin Cities Chapter > > Glenwood, Minnesota > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC