Electric Hammer Shank Bending Pliers

[Mark Wisner]

Yamaha Piano Parts has stocked electric shank bending pliers in the past although I'm not sure if they still do today.  They were very expensive though.  You might call 800 854 1569 and see if they still sell them.

------Original Message-------
From: Farrell <mfarrel2@tampabay.rr.com>
Sent: 04/28/03 06:25 AM
To: Pianotech <pianotech@ptg.org>
Subject: Re: Electric Hammer Shank Bending Pliers

> 
> Thanks. Do you by chance have a web address - all I can find is a website
only in Japanese. Kind of a tough read on my end.

Terry Farrell
  
----- Original Message ----- 
From: "Kerry Cooper" <brispiano@optushome.com.au>
To: "Pianotech" <pianotech@ptg.org>
Sent: Monday, April 28, 2003 8:08 AM
Subject: Re: Electric Hammer Shank Bending Pliers


> Terry,
> Watanabe Musicial Instrument Co Ltd . Japan
> 
> Kerry
> ----- Original Message ----- 
> From: "Farrell" <mfarrel2@tampabay.rr.com>
> To: <pianotech@ptg.org>
> Sent: Monday, April 28, 2003 10:03 PM
> Subject: Electric Hammer Shank Bending Pliers
> 
> 
> > I thought I had seen electric hammer shank bending pliers - basically
an
> electrified version of the pliers on page 49 of the Schaff catalog.
Anyone
> know where I can find electric ones? Or should I just solder one wire to
> each end of the pliers and plug it into the wall?   ;-)
> >
> > Terry Farrell
> >
> > _______________________________________________
> > pianotech list info: <a target=_blank
href="https://www.moypiano.com/resources/#archives">https://www.moypiano.com/resources/#archives</a>
> 
> _______________________________________________
> pianotech list info: <a target=_blank
href="https://www.moypiano.com/resources/#archives">https://www.moypiano.com/resources/#archives</a>
_______________________________________________
pianotech list info: <a target=_blank
href="https://www.moypiano.com/resources/#archives">https://www.moypiano.com/resources/#archives</a>
>