Terry: If you can pick up a couple of small diameter left hand drill bits at a good hardware or home center, this might be even easier. As you drill into the brass, often the bit will grab the brass and the drill will spin the agraffe right out in your hand. Really makes you look like a pro! Mike Kurta ----- Original Message ----- From: "Farrell" <mfarrel2@tampabay.rr.com> To: "Pianotech" <pianotech@ptg.org> Sent: Tuesday, August 05, 2003 3:11 PM Subject: Re: Steinway M Agraffe - Broke? > "I've never seen a chunk of plate come out." > > Oh, come on now! I was only kidding! > > Thank you very much for the complete-sounding treatise on the broken agraffe. Never saw one, but I'll betcha when I go to this appointment, I'll look like an experienced pro on the first try (hopefully the guy won't be staring at me!) - and all because of input from this list. What a great resource. Thanks again David. > > Terry Farrell > > ----- Original Message ----- > From: "David Love" <davidlovepianos@earthlink.net> > To: "Pianotech" <pianotech@ptg.org> > Sent: Tuesday, August 05, 2003 1:28 PM > Subject: RE: Steinway M Agraffe - Broke? > > > > Probably a broken agraffe. I've never seen a chunk of plate come out. > > SNIP > > > > > [Original Message] > > > From: Farrell <mfarrel2@tampabay.rr.com> > > > To: <pianotech@ptg.org> > > > Date: 8/5/2003 9:32:46 AM > > > Subject: Steinway M Agraffe - Broke? > > > > > > Just made an appointment with a guy with a "loose" agraffe on F above > > middle C on a 1970-ish Steinway M. I am not very familiar with Steinway > > agraffes. How would it have come loose? > > SNIP/pianotech > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC