This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment I heard when I was at Yamaha that they use an electric carving knife to = cut the foam quickly and neatly. For what it's worth. Kevin. ----- Original Message -----=20 From: Sarah Fox=20 To: Pianotech=20 Sent: Friday, August 08, 2003 4:20 PM Subject: Re: Accoustic Foam > When we build aircraft wings and parts we use a hot wire to cut it. > Transformer and pianowire should work nicely. Rich A lower-tech, but still quite clean way to do it is with a very long, = sharp butcher knife. Pull the foam slightly apart as you cut. Long, = vertical strokes. Better than a boxing knife, in my experience, as the tip of = the blade pricks the foam. Peace, Sarah _______________________________________________ pianotech list info: https://www.moypiano.com/resources/#archives ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/86/e7/06/cd/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC