Spliting Heads

[Brian Lawson]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment


Brian

Hi, use a cable tie,  white glue hammer head, ca glue on molding

Brian


  ----- Original Message -----=20
  From: Jeffrey Schlaybach=20
  To: pianotech@ptg.org=20
  Sent: Wednesday, August 27, 2003 4:18 PM
  Subject: Spliting Heads


  Didn't check the archive but is there a simple way to repair split =
hammer heads? I tuned a customer's spinet piano Monday and about 7 of =
the heads had the felts pulled away from one side of the hammers (most =
on top but some at the bottom). I thought perhaps clamping and glue but =
what type of glue? And would the pressure the heads are under allow the =
same things to happen all over again? Since it is a spinet I hope to =
avoid taking out the action.

  Jeff Schlaybach - Robesonia, PA
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/94/8c/4b/8e/attachment.htm

---------------------- multipart/alternative attachment--