Where does one find walnut veneer? Sounds like a good idea. I have always used sandpaper and it works good, but veneer sounds a lot better. Do you put a dab of white glue on it, or just stick it in? Richard -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On Behalf Of Joseph Garrett Sent: Wednesday, December 17, 2003 12:36 PM To: pianotech@ptg.org Subject: Re: Tuning Pin Dope Julia queried: ", What is a good recipe for simple tuning pin dope? How many parts rosin to alcohol? Are there other ingredients besides those two? How long will it last to revive the pin tightness? Must one work quickly with it because it dries fast? Are there any disadvantages? What are other options? Julia Gottchall, Reading PA Julia, "Pin Dope" is olde technology that is waaaaaaaaaay past it's time, IMO. I, personally, have become a fan of CA glue, (very thin), in recent times. It works. For how long, I don't know, but I suspect much longer than the "pin dopes". I was extremely critical and skeptical regarding CA, but I think this is one place were it does a good job. (I still maintain it has no place in an action!)(Flame suit zipped tightly.<G> Of course there are other options. If there are just a few loose pins, I still prefer to shim with Walnut veneer. (NOT metal bushings, sandpaper or whatever.) Also, I utilize plugging from time to time. Please let the "pin dope" die a natural death and try something else.<G> Best Regards, Joe Garrett, RPT, (Oregon) Captain, Tool Police Squares Are I _______________________________________________ pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC