Jim: Thanks for your reasonable view. We can get so high-and-mighty about the "true fix" for anything you'd think that a new tire was the "only" fix for a flat. Reasonableness is a good trait. dave __________________________________________ David M. Porritt, RPT Meadows School of the Arts Southern Methodist University Dallas, TX 75275 ----- Original message ----------------------------------------> From: <JIMRPT@aol.com> To: <pianotech@ptg.org> Received: Wed, 17 Dec 2003 12:10:51 EST Subject: Re: turning front rail pins....always a no-no? >In a message dated 17/12/03 10:27:12 AM, Alpha88x@aol.com writes: ><< Yes, turning front rail pins is a viable option. It buys time for a >key re-bushing job. >> >Julia...not disagreeing with you here but a key rebushing job itself is just >buying time before the next rebushing is it not? :-) ><< However, when you have to be turning too many pins too >far, it may be obvious that a re-bushing job is what is really needed >> > Yep I agree....... personally I operate on the 20 degree rule of >thumb......that being if I have to turn the pin more than 20 degrees either way. I am a >little more critical with nice pianos and a little less critical with the >run-of-the-mill types...that being said the guiding principle for me is always the >use of the instrument and the abilities of the person(s) playing it as well as >their expectations. > When Erard developed these thingees he did so with the thought in mind of >using their elliptical (or ovoid if you prefer) shape to extend the life of key >bushings and insofar as practical did not consider such as a temporary fix. >(now don't argue with me y'all, read the patent. :) > While we can use pin turning as a crutch, when overdone, it should not >become such. As for the "too much" friction crowd......if turning the pins does >create too much friction in the bushing than either you have turned the pins too >far or turning the pins is just not going to be a viable option for that >particular instrument. > But then.......... what do I know?? >Merry Christmas everbody..don't get so tied up in final business rush >thingees that you don't take time to smell the mistletoe and spend time with family >and friends!! >Jim Bryant (FL) >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC