I suspect an informed mechanical engineer will have the edge on me. I'll do some research. Thanks. This is part of Richard's "hashing out"! Terry Farrell ----- Original Message ----- From: "Don A. Gilmore" <eromlignod@kc.rr.com> To: "Pianotech" <pianotech@ptg.org> Sent: Wednesday, December 24, 2003 4:00 PM Subject: Re: What is Inertia > > ----- Original Message ----- > From: "Farrell" <mfarrel2@tampabay.rr.com> > To: "Pianotech" <pianotech@ptg.org> > Sent: Wednesday, December 24, 2003 11:04 AM > Subject: Re: What is Inertia > > > > An object's inertia is directly related to its mass and velocity. The more > > mass it has and the faster it is traveling, the more inertia it has. A > > bullet, travelling at some very high velocity, could have a similar amount > > of inertia as a very slowly moving locomotive. > > > > Basically, a good way to think of inertia is, the harder it is to stop > > something, the more inertia it has. > > No, you are referring to "kinetic energy". Moving objects have a potential > to produce energy if you try to stop them. That's what you're thinking of. > > KE = 1/2 * mass * velocity squared > > That's where you're train and bullet example is shown mathematically. > > An object at rest still exhibits inertia, which is the tendency to resist > being accelerated. > > Don A. Gilmore > Mechanical Engineer > Kansas City > > > Terry Farrell > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC