to replace center pins? Marcel Carey > -----Original Message----- > From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On > Behalf Of Isaac sur Noos > Sent: 28 décembre, 2003 17:33 > To: Pianotech Mailing list > Subject: What is it for ? > > > I drilled a 4mm (1/6 ") hole on one side of my parallel flat pliers > (the one I use to move dampers. > > What is this hole for ? (rarely useful) > > I'll send a pic if you prefer. > > Good luck > > Isaac > > > ------------------------------------ > Isaac OLEG > accordeur - reparateur - concert > oleg-i@noos.fr > 19 rue Jules Ferry > 94400 VITRY sur SEINE > tel: 033 01 47 18 06 98 > fax: 33 01 47 18 06 90 > mobile: 033 06 60 42 58 77 > ------------------------------------ > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC