---------------------- multipart/mixed attachment I tried heating and steaming both and each time I broke the damn key! Greg Newell At 11:03 PM 1/9/2003, you wrote: >>You could try diagonal saw kerfs filled with a thicker veneer to "bend" >>it the way you want it to go. I've done this before and made it "less bad". >> >>Greg Newell > >I did one like this a couple of weeks ago. The (natural) key was both >severely twisted, and warped. Took three cuts. Two shimmed out, one >clamped in. Back in the piano, you can't tell which one it is. I've tried >heating, but never had much luck with it unless the twist was very slight. > >Ron N > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives > Greg Newell mailto:gnewell@ameritech.net ---------------------- multipart/mixed attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC