Wagner Safe-T-Planer/Tom Driscoll

[Joseph Garrett]

Tom,
You said: "Without the jig pictured, I found it very difficult to control
the key
as the cutter would chatter and kick the key around."
The reason for the "chatter and kick...", is that the Drill Table is NOT
square with the Planer! Also, you may be running at too low of a speed.
Refer to my previous post regarding "squaring" the Planer to the table.
Best Regards,
Joe Garrett, RPT, (Oregon)

Been There, Didn't Like It, So I'm Here To Stay! [G}