David Love said: "Any other suggestions would be appreciated." (Regarding extracting the bridge pins) David, I mentioned this tool before. Because it's so big I can't scan it, (still no Digital Camera wha!). Go to the Auto parts store and get a cheap Dent Puller. Go to the Hardware Store and get Two nuts that fit the thread on the shaft of the dent puller. Go to the local Welder and have him weld one of the nuts on the adjustor of a pair of Vice Grips, (8"). Use the second nut to "lock" the shaft on the pliers. Grab hold of them nasty bridge pins, (real tight), and give the puller a whack. If you do it right the pins will come out with one whack! <G> Best Regards, Joe Garrett, RPT, (Oregon) Been There, Didn't Like It, So I'm Here To Stay! [G}
This PTG archive page provided courtesy of Moy Piano Service, LLC