-----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On Behalf Of Scott Jackson Sent: Sunday, July 20, 2003 4:50 AM To: Pianotech Subject: Re: Flange Center Friction Increase No matter how 'gently' i try, i have never been able to put a cut centre pin back in a bushing without knocking out the cloth! I would not recommend trying this to anyone (unless they really want practise at re-bushing flanges!). Scott Jackson Australia Check the ends of the pin for burrs or roughness and remove as required before inserting. Place a firm object (such as another finger nail) on the other side of the intend bushing and SLOWLY inser the pin. Paul C
This PTG archive page provided courtesy of Moy Piano Service, LLC